India 8094701127 info@sprayblast.in
Our Products
The End Draft (the direction of flow of air is towards the floor of the spray booth) Paint Spray Booth is suitable for conventional, air-less and electrostatic spray painting and its consists of painting chamber, Inlet Air Filter, Paint Trap Filters, axial flow fan, electric motor, duct, and canopy, etc. The design of the paint booth will be of End Draft type paint booth with disposable paint trap filters on the floor. The intake air into the paint booth system is filtered by an intake filter to avoid foreign particle deposition on the painted surface. The intake air is sucked into the room by the extraction modules located on the back wall.
Powder-laden air from dust zones is sucked into the pre-filter (multi cyclones) due to exhaust created by the exhaust fan. Maximum particles are collected by the pre-filter, while very little powder is collected around
the fabric bags. The pulse jet filter bag dust collector is a self-cleaning system.
Due to exhaust generated by the exhaust fan, End Draft Paint Spray Booth powder-laden air from dust zones is pulled into the pre-filter (multi cyclones). The pre-filter collects the most particles, while just a small amount of powder collects around the cloth bags dry paint booth system. A self-cleaning system is the pulse jet filter bag dust collector.
The PU Coated Paint Spray Booth noise level is below 85 dBA. Dust emission level in the atmosphere through the fabric bags is less than 50 mg / N cubic meters. The suspended powder is only collected in the dust collector. Powder that falls down in the hopper is collected manually from the hopper. Fan motors: 7.5 HP, 415V / 3P / 50 Hz IP 54 protection End Draft Paint Spray Booth.
Technical Specifications
Paint Hood
The paint hood enclosure is fabricated from an MS steel sheet and suitably reinforced for strength and rigidity. The paint booth is open from the front and bottom sides.
The paint hood enclosure is made of an MS steel sheet that has been appropriately strengthened for strength and rigidity. The front and bottom sides of the paint booth are open.
Illumination
The paint spray booth is provided with Four No. Tube Lamps for illumination.
Exhaust Fan Motor
A wet fume collector is mounted with an exhaust fan motor to suck the fume and clean air is discharged into the atmosphere.
Clean air is vented into the atmosphere after a wet fume collector is mounted with an exhaust fan motor to suction the fume.
Control Panel
Suitable control panel housed with DOL Starter for fan motor, pump motor, and On/Off switch for illumination.
Paint Trap Filter
Material:
Glass Fiber-Progressive
Structured
Filter Class: EU4
Dust Holding: ~1000
g/sqm (In dry condition)
Spraying Guns
Ceiling diffusion air intake filter
VISION GLASS
Illumination
End Draft Paint Spray Booth We have the best quality sand blasting machine shot blasting machine, a thermal spray gun, metalizing wire, bentonite plant, a shot blasting cabinet, etc. Check out all products here at Sand Blasting Hopper etc Jodhpur, Rajasthan, India with the best quality.